EPA-NERL: 286.2:  Vanadium by Graphite Furnace AA

  • Summary
  • Analytes
  • Revision
  • Data and Sites
Official Method Name
 Vanadium (Atomic Absorption, Furnace Technique)
Current Revision
Issued 1978
Media
 WATER
Instrumentation
 Graphite Furnace-Atomic Absorption Spectrometer
Method Subcategory
 Inorganic
Method Source
  EPA-NERL
Citation
  Methods for the Chemical Analysis of Water and Wastes (MCAWW) (EPA/600/4-79/020)
Brief Method Summary
 A sample prepared according to EPA Method 200.0 is analyzed using a graphite furnace atomic absorption spectrometer. Specifications for instrument operation and preparation of standards are provided in the method.
Scope and Application
 This method determines vanadium by graphite furnace atomic absorption spectrometry. Sample pretreatment according to EPA Method 200.0 determines the applicability.
Applicable Concentration Range
 10-200 ug/L (optimal range).
Interferences
 Background correction may be required if the sample contains high dissolved solids.
Interactions: Due to the possible chemical interactions, nitrogen should not be used as the purge gas.
For additional interferences see EPA Method 200.0.
Quality Control Requirements
 QC requirements for drinking water procedures are provided in method 200.0
Sample Handling
 Sample handling and preservation procedures are provided in EPA Method 200.0.
Maximum Holding Time
 6 months (MCAWW, Table 1).
Relative Cost
 $51 to $200
Sample Preparation Methods
 200.0
WHO WE ARE
  • NWQMC
  • USGS
  • EPA
LEGAL