NOAA NST: 172.1: Trace metals in marine animal tissues by ICP/MS

Summary
Analytes
Revision
Data and Sites

Official Method Name

Inductively coupled plasma mass spectrometry for the analysis of trace metals in marine animal tissues.

Current Revision

March 1998

Media

ANIMAL TISSUE

Instrumentation

Inductively Coupled Plasma - Mass Spectrometry

Method Subcategory

Inorganic

Method Source

NOAA NST

Citation

Sampling and Analytical Methods of the National Status and Trends Program Mussel Watch Project: 1993-1996 Update.
NOAA Technical Memorandum NOS ORCA 130. March 1998. Silver Spring, MD. 233pp.

Brief Method Summary

Sample preparation and analysis methods have been developed and refined that allow accurate and precise determination of major and trace elements in marine animal tissue samples. Sample preparation emphasizes homogenization and total digestion steps that minimize contamination. Analysis includes a full suite of quality assurance samples (emphasis on certified reference materials) in order to produce reliable data. These methods allow measurement of both background and elevated concentrations within NOAA's Status and Trends Program, permitting subtle temporal and spatial differences to be detected.

Scope and Application

This method measures trace metals (at ug / g concentrations) in marine animal tissues.

Applicable Concentration Range

0.1-1000.0

Interferences

Spectral interferences may be minimized by sample dilution, use of an alternate analyte wavelength, or selective volatilization of the analyte. Non-spectral interferences may be detected and compensated for using the method of standard additions.

Quality Control Requirements

The quality assurance / quality control requirements are initial calibration and continuing calibration checks, method blank analysis, surrogate compound analysis, matrix spike analysis, and reference sample analysis.

Sample Handling

Bivalves are hand-collected and shucked at the laboratory. Tissues are freeze-dried in Spex jars and homogenized using methacrylate balls in a Spex mixer/mill.

Maximum Holding Time

6 months (frozen)

Relative Cost

$201 to $400

Sample Preparation Methods

NOAA TM #130

This method has 6 analytes associated with it.

Analyte	Detection Level	Bias	Precision
Arsenic(7440-38-2) Arsenic As	0.100 ug/g	N/A	0.70 RSD
Cadmium(7440-43-9) Cadmium Cd	0.003 ug/g	N/A	0.40 RSD
Chromium(7440-47-3) Chromium Cr	0.150 ug/g	N/A	1.50 RSD
Lead(7439-92-1) Lead Lead and compounds (inorganic) Lead and lead compounds Pb	0.100 ug/g	N/A	0.90 RSD
Nickel(7440-02-0) Ni Nickel Nickel, soluble salts Raney Nickel (R)	0.140 ug/g	N/A	0.60 RSD
Tin(7440-31-5) Sn Tin	0.120 ug/g	N/A	4.10 RSD

Precision Descriptor Notes:	Precision and accuracy data were obtained from NOAA's NS&T interlaboratory validation QA program. NOAA Technical memorandum NOS ORCA 142 "National Status and Trends Program Thirteenth Round Intercomparison Exercise Results for Trace Metals in Marine Sediments and Biological Tissues".
Detection Level Note:	Federal Register (1984), Vol. 49, No. 209: 198-199.

Revision	PDF/Link
March 1998

The Water Quality Portal contains sample results from sites that use this method.

Download WQP data

Select data:

Sites only
Sample results only

File format:

Comma-separated
Tab-separated
MS Excel 2007+

Sites where this method was used

Loading Sites ...

NOAA NST: 172.1: Trace metals in marine animal tissues by ICP/MS

WHO WE ARE

LEGAL